The construction would be simpler if the water travelled exactly at the same time.
It isn’t.
The quantity of wastewater that is pumped into a home’s water system is subject to change throughout the day. Industrial and commercial facilities can encounter peak operating times. The conditions for stormwater can drastically change according to the weather. Demand for clean water also increases and falls depending on the nature of the application.
So, designing the pump station isn’t merely an issue of identifying a flow amount and then selecting the machines that are able to meet the requirements. Engineers need to be aware of the various conditions the system is expected to encounter.
Image credit: romtecutilities.com
Be aware of operating conditions Consider Operating Conditions, not just maximum capacity
It is evident that maximum flow is important however it is only one part of station operation. Imagine a wastewater system that was designed for a high peak-flow. The majority of the time, the incoming flow is less. In normal operating hours, the station should still function normally.
This raises concerns about wet-well size, pump operation and controls the head, conditions of the pump as well as how equipment will respond to a changing demand.
A properly engineered package pumping system brings these considerations together around the actual requirements of the site instead of treating maximum pump capacity as the entire design objective.
The wastewater industry has its own day-to-day Theme
The influent conditions at a wastewater liftstation which serves homes as well as businesses or municipal infrastructure may change during the course of its operation.
The station has to have an effective control plan that permits the system to start the pumps and collect the wastewater. The structural dimensions, pumping equipment and piping, as well as electrical parts and controls all play a an important role in this process.
Other considerations for the specific site may be considered in the design. Romtec Utilities will incorporate any extra systems, including grinders vaults or odor-control equipment as needed. This results in a station built around the needs of the project, instead of a standard configuration which is used at every wastewater site.
Stormwater Changes More Rapidly
Stormwater is a completely different process. A stormwater system can be relatively quiet during dry conditions, but then see a massive inflow of water following a severe weather incident. Stations can be a part of bigger flood control techniques, such as detention or treatment which is why the stormwater plan is an essential part of the design of the system.
Romtec Utilities takes into consideration things like the flow rate that is required along with head-related conditions, the size of the system as well as the needs of the location and environmental considerations when designing these systems.
The layout of a station designed for a commercial project may differ from the design of a station created for stormwater management in municipal areas.
Head Conditions Are Important Alongside Flow
Moving 1,000 gallons is only part of the engineering issue. Engineers need to know the direction of this water and the amount of resistance it will face.
The head condition of the pump is affected by a variety of variables that include elevation changes and piping configurations, discharge conditions and other system features.
This connection between flow and head is another reason that choosing a pump solely based on its rating is not enough. The pump’s technology and station’s design must be compatible to the conditions of hydraulics throughout the application.
Plan for the conditions that the station will actually experience
Romtec Utilities designs and develops custom pumping systems that meet the requirements of wastewater treatment, stormwater management, clean water, industrial applications, boosters, and many more. Its process can include initial design and budgeting as well as complete plans sets, system supply, documentation as well as startup, testing and commissioning.
The principle behind the system is as simple as this pumping systems can’t spend their entire lives working under the same set of conditions.
They are subject to shifting flows, changing demands, as well as project-specific hydraulic needs. This is a fact that must be taken into consideration when designing a functional station.